extrusion. (what to see at npe 2003).

The NPE is usually a competitive display that can be convened by the largest and most eye-catching equipment manufacturers.
However, this NPE is not about big and you may not kick so many tires as usual.
But that doesn\'t mean we don\'t see many new technologies.
Some enhancements can make huge differences in processes and products.
Most of the new developments are designed to increase the production of machines that are already very advanced.
In order to make the old extrusion line work better, some new products have been designed.
You will find improvements that apply to all aspects of the extrusion line, up-and downstream--
Molds, tools, controllers, motors, calibrators, coolers, knives and pullers.
Many large machine suppliers have also shown new expert services that are available to many industry talent at the show.
So the processor should be ready to test samples and ask questions because there will be a lot of industry experts to answer you ---for free.
The most striking novelty of NPE extrusion may be Cullom\'s revolutionary Convac tool concept for corrugated cardboard (
Or any large pipe extruder).
Instead of continuous bellows, the Convac system manufactures a discrete hollow part chain.
In principle, it works in a similar way to the wheel blow molding machine, except that the tool does not move on the wheel, but on the continuous ring of the corrugated tool track.
When the profile is squeezed, it is sucked into the closed mold and squeezed into a hollow part.
The Convac system, which has been commercially used for several years, actually reduces the grip.
In addition to blow molding, there is garbage, says Cullen.
The company will give NPE away from mini coex football;
They will have a PP in the outer and inner layers of Santoprene TPV.
In order to increase the production of PVC profiles, three new low temperature technologies have been demonstrated by material enhancement International: 1)
Internal profile cooling system for the introduction of frozen nitrogen into the profile; 2)
Low temperature calibration device; and 3)
Cold cooling tank.
Cryo-there are several commercial installations
Cooling tank and one of the new refrigeration equipmentcalibrator.
Will the production of PVC profiles increase by three to four times with nitrogen cooling, the company said? -
If the speed can be handled by the extruder, mold and downstream equipment.
Getting more profiles from one mold also increases the output.
Capture a video from German profile mould manufacturer a & G showing a sixstrand PVC die.
Downstream progress of tube
Boston Matthews and colco have both shown the winding speed and they all have automatic loading and unloading devices that allow the reels to run continuously at very high line speeds even during the reel replacement.
In the pipe mold, Maillefer will show a five
Layer coex die head of barrier car tubing.
Maillefer has designed one for six layers.
The pipe coil technology shows a new pipe/profile cutter, called \"clean cut\", which can be programmed to cut a specific number of profiles of different lengths.
Many profile displays involve Woodand fiber-
Reinforced profiles.
NFM welding engineer touted the capability of its WE series counter
Rotating, staggered twins
Screw Extruder holding fiber length for a long timeFiber extrusion. NFM\'s single-
Double Thread and thread
Target Wood-screw line
Composite profiles.
For fences and other profiles that need rework, professional extrusion equipment company
Its mobile table saw adds flexibility, usually with simultaneous saw, cutting and punching, but can now also be crushed and ground.
Because the plastic is warmer, this makes the output higher, the cost is lower, and the cutting is better.
The thickness gauge shown on the NPE also works faster than ever before.
The on-line control shows an ultrasonic thickness gauge that measures four times faster than before.
Expanding interest in olefin foam Leistritz will perform what is considered to be the first ever demonstration of olefin foam with a supercritical [CO. sub. 2]
A pair of co-twinsscrew extruder.
In the meantime, DavisStandard will use the counter to perform a static display of the coex PE foam linerotating twin-
Special twin screw extruder
The layer mold from the Sentinel product, as well as the zhengbuic acid or [CO. sub. 2]blowing agent.
The new screw adds the output of PE foam from the previous 900-
Lb/hr rates up to 1400 lb/hr.
Sentinel displays unusual PP foam products at the booth, including the development of three-and five-
Layers of foam core and rigid housing.
Sentinel uses ring mould and 4:1 blow-
Position the rigid skin in an upward scale so that the bubbles do not crash.
Sentinel says the resulting thermoforming sheet is very hard and does not sag in a thermoforming oven.
Sentinel will license its process and mold technology for packaging applications and in-
A company that produces automobile products.
The more secure volume heap NPE will show many new chill
Roll stacks of paper and cast film, both in line with the new ANSI safety standard for quick emergency opening.
Cooling rollers are also growing to increase production.
The new evolution plate series of Welex has been redesigned and the extruder set is higher to accommodate larger cold rollers-
Easier to clean the mold.
The news of the flat die includes EDI\'s unique mechanical and thermal drive combination in its new Autoflex ville meter
Profile mold is said to be useful for controlling lightgauge sheet. Davis-
Standards will demonstrate the development of its wireless data
Collection system of laboratory
Size cast film line. Though high-
Technically, it is designed as a revamp of a factory where old machines or layouts or distances make hard-wired data collection expensive or difficult.
Almost all of Chicago\'s film blowing shows have three levels, which reflects the market from a singleto multi-
Use additional layers to complete the next Test, layer conversion film. (
The Dragon Dream in Taiwan is an exception. He brought fivelayer line. )
A lot of traditional single
Steve Engel, president of Kiefel Inc. , explained: \"layer films are developing to three levels to help protect against imports . \"\"Any non-
The increased barrier membrane capacity is now three-layer.
\"Almost all suppliers of blown film equipment at the show are also running their latest automatic
Measure the gas ring and/or automaticallydie systems.
Most of them have upgraded color touchScreen control.
Brampton Engineering will show an unusual car
The dead system is called I-
Flex is the only Flex to change the mold gap with a mechanical rather than a thermal actuator. For air-
Ring novelty, view \"binary double-lip\" (i. e. , four-lip)
Gas ring of macro engineering company.
2x2 is not new but has never been shown before.
High output on the dedicated line.
As for the thickness gauge, Kundig is introducing KNC-to North America-200--
It is reported that the only
Contact Capacitance gauge on the market.
Automation and Control Technology claims to have the first x-
Instead of Ray transmission of nuclear.
In fact, every major supplier of the blown film production line is also showing the new high
The speed hoist, many of which are made for larger roller diameters.
For example, Addex\'s new super-wind stacked winding machine is up to 58-
It is said that the volume is the record of the stacked winding machine.
The new service arm, Black Clawson, extrtek tek Milacron, and several smaller suppliers are rolling out new \"expert\" services at the show.
To a certain extent, they reflect the talent pool they have due to a slowdown in their business.
Mirazon services are available to existing or \"potential customers \".
\"The BC Encompass program for Black Clawson is open to any processor.
It focuses on optimizing the process of casting film, extrusion coating, coating and drying, and flexible packaging.
The program provides 24/7 global emergency services (
Replacement parts included)
As well as on-site services, equipment upgrades, engineering services and R & D.
The project started with a factory audit and Black Clawson employees conducted the audit at an additional cost of $995 and gave a report proposing improvements to maintenance and overall line capacity.
Audit fees, in addition to fees, are refundable if the processor orders equipment from Black Clawson for audit.
ExtrusonTek\'s trump card (
Application consulting engineer)
It is a new team of more than a dozen expert consultants.
Some are Milacron employees, others are external experts who sign processing and screw support contracts with customersdesign issues.
They include Wells.
Like James Frankland
President Newcastle;
Jim Griggs
The manifold mold of the Mastic/Alcoa, which took 20 years in regards to the wall panel and pipe extrusion of the Mastic;
And Ernst Kruger, former general manager of CPM acquired by mirakon.
Exhibitor List includes extruder, mold, gas ring, mesh changer, screw, barrel, controller, guaging, web-
Handling and other downstream equipment, bags-
Manufacturing, processing and other conversion equipment of the equipment.
New developments have emerged.
Booth 5683 Austrian PVC profile molds, vacuum calibrators and downstream equipment manufacturers of A & G Extrusion Technology Co. , Ltd. will show A new multi
The strands of six profiles. ADDEX INC.
Booth 9733 shows the new superwind roll-around machine
Film roll to 58 in. diam. --
It is reported to be a record of a stacked hoist.
Also equipped with center/Gap/reverse winding machine with embedded knife.
Displays three gas rings with manual, external and internal thickness control.
Compact oscillation traction is also shown
Close, nips, rollers and bubble cages.
Booth 5575 advanced extruder technology (
Show us extrusion service)Builds single-
Screw pipe and profile extruder, sheet and casting
Film Line, series foam line and double-
Diameter recovery extruder.
New mixing screw showing PP and new improved crammer feeder.
World Advanced Technology Corporation
Booth 8405 shows replacement screws and barrels.
Second-hand extrusion machinery is also sold.
Advaz Measurement and Control System Co. , Ltd.
View automation and control technologies(ACT)AEC INC.
Booth 1840 shows the new independent vacuum AVS production line
Each compartment has a individually controlled size tank, plus the new ACC pull pul-
Cutter, Puller and servo cutter.
Booth 9158, AISA automation industry SA (
Show w/Sprimag)
Manufacture of laminated and cosmetic pipe machines.
There will be an introduction to depth-80s machine.
See ExtrustionTek Dragon Akron.
See Diamond USA company AKRON quality feedback screws
Allied death Company
Booth 4116 showing the Fiat Duraflex series
Film and sheet mold.
Also re-processed and re-manufactured the flat die.
American extrusion service
Booth 5575 service and builds-
New representative for HPM extruder and complete paper production line.
American Jet Corporation
Booth 708 will showcase two fancy bags
Manufacturing machine: DB80G SH/TSH type for sidegusset, soft-
Loop Handle Bag, automatic welding handle can be selected;
And DB120E Coex for barrier food bags in four lanes.
KUHNE, USA
Booth 6139 launches color touch screen extrusion controls for less than $10,000.
New turbines are also shown. Cool air-
Extruder cooling system, available in any brand single-
New screw for water
The cooling extruder is an improved shunt for more uniform cooling.
New show for the first timeHP. sup. 2]
Butler barrier screw
ANSI-is also shown-3.
For paper and 6-in. , 30:1 air-
Cooling extruder with coextruder.
Booth 162,1802, maplan corr, USA (
Display w/battonfield Services Limited)
Displays the new AMC compact integrated production line for technical profiles with interchanged dualand single-
Screw configuration.
A new type of vacuum calibration V 125 VA and a new RD2-are also shown-10 dual-Spider tube dead
Also equipped with the SS. 75-30 single-
Screw Extruder of 200-
Hp driver for high density polyethylene/natural-
Fiber Composite profiles and TS-135 twin-
Screw extruder for PVC tubing, profiles, siding or natural fiber composites up to 3520 lbs/hr.
Exhibition 3-AR extrusion booth 13416
Layer coex mould for blowing film and air ring.
Automated Manufacturing System booth 10116 offers turnkey custom production lines and downstream equipment.
The extruder is also re-manufactured and the L/D is modified.
Automation & Control Technology(ACT)
Booth 820 recently acquired the instrument manufacturer, advaz, and will launch a series of non-nuclear X-
Ray reverse scattering sensor, allowing single
Side test.
PMC is also displayed-line basis-
Weight/thickness measurement and control system.
Luigi Bandra hot spring booth 7019 (
W/Vistar Machinery International Co. , Ltd. )
Introduction to the coroting twins
The spiral technology of the cast film, able to prepare the PET film for thermoforming directly from PET bottle waste without drying or crystal.
A single line was also highlighted. and twin-
Counter screw extruderand corotating.
Robert bar
Booth 4933 introduction to VBET (variable-barrier energy-transfer)screw.
Also shows a dynamic
Mixed spiral tip and bar and moreflighted screw.
International Screw Company
Booth 10117 rebuild extruder screws and barrels and use in-
Ability to design a house.
Display screws, barrels, tips, end caps and circuit breaker boards.
Gloucester EngineeringINC.
Booth: 1602, 1802 (
Display w/battonfield Services Limited)
Demonstrate the upgraded Extrol control on one line, making three
The bread bag taken out of llannan is blown with a layer of film, clear, such as low density polyethylene.
Line will use the new 16-alternately-in. , nickel-
Plated Optiflow meter-
Imitation mold with automatic profile air ring.
Also shows the static display of the new horizontal tractionoff design.
Demonstrated the company\'s first complete production line developed in Germany with sister company SMS extrstechnik for thermoforming refrigerator liners.
It produces up to 7-layer sheet 41. 3-or 65-in, wide.
Also shows a tandem foamsheet line.
See Dynisco Co. , Ltd. for bellingzhe Co. , Ltd.
BERLYN extruder
Booth 5709 debut a 3. 5-in.
Extruder with new twins
Low spiral vertical feederbulk-
The density material also displays screen changes, including new models with continuous filters to remove large amounts of contaminants.
Booth 2002 (
Show w/Krauss-Maffei Corp. )
Shows an unusual model of a Planetary Calendar
The volume stack of three independent adjustable volumes built by Seide was recently acquired by Berstorff.
Seide extends Berstorff\'s products to PS, PP, pcs and PETG plates and extends them to plates with a thickness of up to 2. 4 in.
Also information about Berstorff sheets-Screw extruder.
Beta lasermike booth 4007 with new ultrasonic Wall
Thickness Measurement and concentricity devices with automatic settings, as well as the latest-
Generate DataPro 5000 process controller with touch screen.
The new one is gravity extrusion-
Through the recent purchase of the control system obtained by the Danish instrument manufacturer.
Demo laser diameter scanner and bench scale.
Beutelspacher s. A. DE C. V. Booth 12607 (
Trade Commission of Mexico)
Mexican machine manufacturers will show three for the first time
A layer co-extrusion system and a new laboratory extruder.
Bielloni castello s. P. A.
Booth 10755, which recently acquired Dolci squeeze, will feature Dolci\'s blow-making-and cast-film lines.
Bielloni printing machine is also equipped. BIMETALIX DIV. OF SPIREX CORP.
See company Spirex
Bkg bruckmann & kreyenborg granuliertechnik see Kreyenborg industry.
Black Crawford conversion machinery
Booth 4539 will provide a new \"BC Encompass\" project for 24/7 global emergency services and spare parts, on-site services, upgrades and engineering.
Also add new equipment streamer film, paint, lamination, modular QFP, \"plug and play\"and-
The \"play\" is designed to minimize the cost and lead time components.
Bolton industries
Booth 7220 of the new company, which acquired the assets of former bobor Plastic Equipment Co. , Ltd. , has re-
Design and expand product line including a complete downstream equipment line-
Mold, calibration, and fixtures--
For Wood/plastic composite profiles.
Booth BONDABELT 3062Exhibiting w/G. F.
Goodman & Sons)U. K.
The manufacturer\'s traction belt.
Bangmart EnterpriseBooth 7231 (
Taiwan Trade Center)
The manufacturer of extruder and cutting machine in Taiwan is also computer 4to six-
Color printing, coating and drying equipment.
Boston Matthews
Booth 4926 has introduced an AC automatic winding machine for flexible tubes and profiles, which automatically replaces reels at a wire speed of up to 1600/min.
Also run a new unitized 1. 25 in. -diam.
Compact extrusion line with AC drive, 8-
Ft cooling tank and AC puller/rotary servo cutting machine that can cut up to 50 times/min. C. W.
Blabander instruments.
Booth 814 single-and twin-
0 screw Laboratory Extruder. 75 to 1. 25 in. diam. and counter-
Rotating tapered twins that react to extrusion.
Brampton engineering
Booth 4749 introduction with I-Film blowing mold
Flex automatic meter-
Control lip with mechanical actuator 1.
Push or pull the mold lip separately.
It is said to be held 2-
The specification change at 2 Sigma is 3%.
It\'s also highlighted by its water frost blowing-
High output film system for clear PE film. A small, high-
The output mold and the streamlined coex mold will also be displayed.
Breyer gmbh maschinenfabrik Booth 10558 presents a video of squeezing cosmetic tubes with special spiral molds to reduce welds.
And 40-
In, the flat die of polished film and paper with new manual adjustment flexible lip.
New, but not shown, is a fly-
A knife tube cutter that can cut up to 300/minute. BRUCKNER INC.
Booth 12713 focusing on sequential movies
Stretch line up to 10-meter-
Wide two-way stretch of PP, PET, nylon, PS and PVC.
Professional Shrink film, synthetic paper and up to 7-
Layer-enhanced barrier film.
The LISIM simultaneous stretching system for PET and PP is also shown.
The business unit of Formtec is characterized:
Screw extrusion without drying APET.
Canada feed screw Manufacturing Co. , Ltd.
Booth 9713 will feature the MeltMaster and MeltExchange series of proprietary screws.
Canterbury Engineering
Booth 12513 manufactures and designs custom screws and barrels.
CDL technology
Booth 12447 new single
Screw extruder with plug
In the heater belt (
Not hard wired)
For easy replacement.
Three extrusion machines, one with a new PLC controller, are shown. CDS (
Custom downstream systems)
Booth 12439 show new high
Strength Spray cooling box with adjustable water flow compartment.
And the new CSS3-
3 Mobile servo saws with touch screen panel.
The vacuum calibration table is also shown;
A combination pullercutter; model CCH 120-10Q haul-
Equipped with custom splints and maximum clamping area; four-Rail transport-off;
And a flat pull-off.
Zhichang Machinery Enterprise Co. , Ltd. LTD. Booth 7026 (
Show w/Karlville development USA)
Series foam made by Taiwan company, rigid-
Film, cast film line.
CHIEFWELL Engineering Co. , Ltd. LTD.
Taiwan company booth No. 4492 manufacturing and transformation of sheet extrusion production line, polishing-
Production line for coil, calender, coating and lamination.
China JARI tools Technology Co. , Ltd.
Booth 4694-time U. S.
The exhibits will include tools for PVC windows and door profiles;
Co-extrusion of plexiglass/hard PVC or hard/soft PVC;
Custom molds for profiles, foam profiles and wood/plastic composites.
Customer samples were also displayed. CLOEREN INC.
Booth 7305 will launch a new extrusion-
Coated mold with edge
External sealing mechanism for reducing beads and preventing leakage.
Proprietary Micro is also being discussedlayer stretch-film dies. CMD CORP.
9913 booth introduction 6052 lottery module-
Tape bag with enhanced tension and touch screen PLC control.
It will run on the show and CMD will give away a roll of bags.
It is also equipped with an improved CMD rotary overlapping bag winding machine with all servo positioning, as well as a type 2352 surface winding machine capable of 700/min. CMG-
Booth 12840, meccaniche costruzioni gallia srl, singleand multi-layer blown-
Thin film line with a plane width of 1. 5 to 10 ft.
Commordor machinesINC.
Booth 8443 makes series foam extruder for PS.
Samples of the product will be displayed, not the equipment.
COMPUPLAST International Co. , Ltd.
Booth 10748 has released two new modules for Flow 2000 3D finite element software to simulate complex mold geometry: the grid division module imports 3D models from any standard CAD format and then creates 3D grids.
Automatic flow balancing module automatic adjustment of mold geometry CONAIR Booth 2616 will provide new partition temperature control for profile cooling and show data for hot water cooling of large profiles faster than cold water because of fast heat.
Display high-
Strength Spray Tank 6-
Ft, modular, dry
Vacuum calibrators, improved servo saws and servo cutters with new software and improved repeatability.
In addition, the new series of hydraulic and manual replacement screens of BD Plast in Italy combine continuous screens with two skateboards.
Baotou Steel conforma inc.
Booth 4367 provides anti-corrosion-
Tungsten resistance
Carbide Cladding for screws and molds.
Sample showing barrel liner, screw and tungsten
Hard Alloy flexible \"cloth\" for covering the profile \".
Continental machinery industryLTD.
Booth 13004
PVC includes screw extruder of wood composite material.
DIV ac SYSTEMS, DIV.
See CULLOM Machine Tools & molds
Conversion SystemsBooth 7026 (
Show w/Karlville development USA)Will show in-line bag-Make machines.
CORELCO booth 9459 high-
Speed Tube hoist and downstream equipment for Bellows, plastic mesh and pre-wired bundle. CORMA INC.
Booth 5908 provides corrugated equipment for single person, double-, and triple-wall pipe--
Includes patented molds, tools and downstream processing equipment for 1mm ID to 120 in pipes. OD. COROTEC CORP.
Booth 10721 features a new economical blown film treatna processor with two open frames
Side Handle, fixed or adjustable width.
The latest UniDyne corona processor with removable electrodes is also shown for narrow nets.
CPM Dragon see Tek Dragon extrusion.
CRG LOGICS INC.
Booth 5784 introduction manual/lever, hydraulic slide cover-
Plate and continuous type.
Cru-crucble service center available at Booth 10110
Includes the latest CPM S3OV, a patented high-
Hardness tool steel.
Also shows its CPM \"KillerV\" high
Vanadium steel.
CULLOM machine tool mould Co. , Ltd.
Booth 7045 presents the novel Convac system, an improved corrugated system that continuously squeezes out the \"daisy chain\" of discrete hollow parts \".
The production of coex mini football will be presented at the exhibition.
Culac is refusable on Cullom\'s corrugated box.
Booth 2638 of Cumberland project introduces new downstream equipment lines--
Model CSI-will be displayed-
3 servo cutters and a upcut saw.
Cooling and shaping tanks, vacuum calibrators, conveyors and dumping stations for pipes and profiles are also provided. DAVINOR LTD.
Booth 9039 shows LayerGauge optical off-
Line measuring instruments for measuring the thickness of transparent or translucent layers using white light
More transparentlayer films. DAVIS-STANDARD CORP.
Booth 5107 introduces and presents wireless remote data collection and its epic disease control on the Killion cast film series.
Series foam production line introduced but not shown 94-mm counter-rotating twin-screw.
Show the new 45: 1 co-twins
Screw extruder for foaming and cooling in one unit.
Show GP-
94 twin coroting
New short barrel for high yield screw extruder for PVC profiles (20:1 LID).
The gear reducer installed vertically on 4 is also shown. 5in.
Hot extruder; a Gemini GO 61-Double-mm cone
Screws for filling PVC profiles; 75-
Mm, 34: 1 standard V single-screw extruder; D-S 125-
Vertical extruder;
310A automatic coating mold;
WesJet AutoPro air ring;
And a lab film production line with Eagle glue counters
Develop with Lasor/dynamics ronics.
Delta puller Machinery Co. , Ltd.
Booth 6313 single manufacturer
The spiral profile extruder of PVC is rolling out its first parallel double-
Screw extruder for PVC profiles. DTS twin-
The screw models are 75, 94 and 114mm in diameter.
26: 1 or 33: 1 L/D with conventional or touch screen controls.
Diamond USA
Booth 5675 shows the new double
TL 150/30 laboratory production line with two interchanging barrels and screws: 1. 5-in. diam. smooth-feed and 30-mm grooved.
Also show TL-
150 and TL290 single
Screw Extruder, screw, mold and barrel-
Heating technology. DR.
13319 booth introduction card tape
Type filter tester for detecting particles, reunions and fish eyes in melting in less than 10mm of the time. Launching a 30-mm-diam.
Cast of pilots with two
Gap MD orienter for breathable film.
It has a 30: 1 ventilation extruder, 300-
Mm slot mold and two cold rollers.
A winding machine with thickness measurement, edge trimming and stamping is also shown. D. R. JOSEPH INC.
Booth 6022 will be equipped with the new microprocessor-controlled IBC.
A new seal/cutter is also shown.
Didi Research Technology Service booth 5699 provides complete Didi serviceIrrigation pipes.
Derosbach Limited
Make corrugated equipment and tools at KG Booth 6371.
Dynamic Metal Processing
4598 booth features Dynablue ferretic-
The nitrogen-Carbon Co-infiltration process of the screw and barrel surface hardening.
It is covered more evenly using a boiling bed than atmospheric nitrogen or salt bath.
Dynisco llc Booth 5526 presents a series of standard filled extrusion pressure sensors with new Dymax wear
Anti-coating that extends the sensor duration by four times without reducing sensitivity also shows new oil
More heat resistant and therefore more durable filling sensors.
Solid nonfilled SPT (
Silicon pressure sensor
Series with better repeatability and stability than previously unfilled sensors.
Built-in temperature sensing is possible without a separate thermocouple.
SPX series melt is also introduced.
Pressure Transmitter with HART (highway-
Addressable remote transfer. mitter)protocol--
Industry first.
Bus is also introduced-
Enabled melting sensors with digital outputs for CANopen and device enet protocols, as well as new 2290 and 2291 series pressure and process metrics that are smaller and faster, and cheaper than the previous 1290 series.
Also shows a new pair
Bolt continuous mesh changer, standard hydraulic and manual mesh changer and gear pump of all sizes.
Eagle Manufacturing Company
Booth 12936 debut item-
Eagle model hp-24-
Transport in-RSA
Line profile fabrication with new touch screen controls has a larger eaglemunit unit on Merritt Davis booth.
Painting will be done on the digital photo frame booth.
ECON Booth 13543 Austria is low-The viscosity melts.
A pyrolysis furnace for cleaning molds and circuit breaker plates is also shown.
5161 booth EGS metering system (
Show European control)
Show off the recently launched, cheaper pre-
Engineering solution with thickness of 21
Control System with beta meter, one or two scanner frames and Wonderware display software.
Booth 11050 of eisbaer trockentechnik Co. , Ltd (
(Australian Trade Commission)
The cooling system of the blown film will be shown.
Elba spa booth 9955 Italian company will show more
Vacuum lane changing machine-
Bag with zipper or no zipper.
13443 the Italian company will display the space of the aviation electronic system SPA-
Clamp thickness-
Measurement system.
Eprotec americas llc Booth 13023 sells melt pumps manufactured by Eprotec extrusion technology company in Switzerland.
EREMA North America
Booth 7918 running model SW 2/104 tf-
A rinse screen changer for film recycling.
Earhart Lemmer
Website guide for Booth 10759 supply
Tension control, web-
Check system and web-
Cutting equipment. ESI-
Extrusion services
5776 booth profile, especially expert in extrusion equipment for wood downstreamcomposites.
ESI will present for the first time a dual servo manufacturer for slotting, punching and cutting small profiles with fiber optic at a speed of 90 ft/minoptic control.
Evercast Machinery Co. , Ltd. LTD. Booth 7132 (
Taiwan Trade Center)Offers single-and twin-
Screw extruder for PVC profiles
Foam, non-foam and co-extrusion--
Use with mold calibration, cooling tank, trailer and cutter.
Systems for pipes and pipes include weaving and reinforcement.
Extrusion control & Supply
Booth 10922 showing parts for extrusion mechanical repair and maintenance.
Exhibition booth 4561-new Autoflex VI extrusion Mold Industry Co. , Ltd-L gauge-
The contour analysis system of Light sheet, by combining the mechanical lever with the thermal drive, moves the flexible lip twice.
It also shows the new profile mold with short stay time, fast cleaning speed and fast setting-up.
Show the new ultrasonic system that cleans the mold separately without removing it from the extruder.
In addition, the recently developed dual wrinkle removal and Accuflow adjustable coex feedback blocks for the casting film and coating are also shown.
Booth 1440 (
W/Milacron Inc. )
Features new company resources called \"ACEs (
Application Consultant Engineer)--
A team of more than a dozen industry experts can discuss processing and application issues such as screw design.
Announced, but not shown, the new TP series is high
Double torque parallel
Screw Extruder developed by CPM Milacron.
They come in four sizes and are 26: 1 or 33: 1 L/D for rigid PVC and wood flour profiles.
Also highlight but not show Akron Milacron single
Screw extruder from 0. 75 to 12 in. diam.
Wear Technology screws, barrels, drives and progressive precision companies are also discussed
Screws and barrels. FACTS INC.
Booth 5751 PC-or PLC-Based on extrusion
Control pack for temperature and speed control with a single extruder or formula storage for the entire production line.
Custom controls that integrate the extrusion line into the entire factory CIM are also shown.
The fact also makes the control panel and the CIM component.
FAS conversion machineryFLENDER CORP.
Show booth 4690 of new ALine single-
Screw extruder from 2. 5 to 10 in. diam.
Higher torque and lower noise than the SZNF model they replaced.
Motox is also shown-N drive motors.
Fangji ironmaking Plant Co. , Ltd. LTD. Booth 7525 (
Taiwan Trade Center)Builds single-and twin-
Single Screw Extruderand multi-layer blown-and cast-
Film and sheet production lines for pipes and multi-pipes, extrusion coating and laminating equipment and systems
Layer PVC foam board.
Frederick enterprisesLTD.
Booth 10726 features round looms that produce bags.
Future design company
Booth 3206 shows three recently developed gas rings: the automatic Saturn elf (
Running at the show)
, The Saturn titan of HMWHDPE, the Saturn Mach I of the heavyweight film.
The new Mini giant cantilever winding machine and labsize film blowing line are also shown.
New corona processor and 30-
KHz generator from Martignoni, Italy. G.
Booth 7019 calini fabbrica (
W/Vistar Machinery International Co. , Ltd. )
Make automatic and half
Automatic curlers. GENCA CORP.
Booth 10544
Pipeline and cross pipe and pipe mold from 36 to 15. diam.
Single layer and coex.
Screws and barrels are also shown.
Booth GHIOLDI 7144 (
Display w/thinapongPlast machine)
More Customizedlayer blown-and cast-
The film line is 2 metres wide. GLYCON CORP.
New laser available at Booth 1285
Alignment service for screws and barrels.
Screws and barrels are also shown. GNEUSS INC.
Booth 4372 shows two redesigned RSFgenius melt filters with a 20% increase in filtration: RSFgenius 75 with a filter of 17 cubic feet and RSFgenius 175 with a filterG. F.
Goodman & Sons
Booth 3062 introduction less-
Expensive.
\"It is said that its mechanical control is faster and more accurate than microprocessor control.
The pull belt from Bondabelt will be displayed in the United States. K.
See Uniplast International Inc.
GUILL Tools & engineering
Booth 6355 introduction to SyncroFlow thermal-
A separation mold that allows nylon to be squeezed together on rubber.
Also shows the spiral-
Flow mold for medical pipe, feather contact concentricity adjustment, rotating cross head and new micro mold. HARREL INC.
Booth 5715 exhibits new RS-
600 roll stacks that meet the new ANSI safety standards.
It will show a new, economical WD-
100A paper machine.
Patented alternative polymer tubes are also shown
Two extruder switches the extrusion system of the polymer.
Haiming Stone Machinery Co. , Ltd. LTD. Booth 7026 (
Show w/Karlville development USA)
Taiwanese builder of the bag-
Manufacturing machine will introduce machine for wire
Loop handle bag.
No core bag will run-on-a-
Rolling Machine and patch-handle, bottom-
Bag sealing machine. HIGH-Technology company
Booth 4957 showing the new microprocessor
Continuous extrusion control
Ribbon screen changer.
The two units will run on the stand and the extruder will produce particles and film. H. M. S. ANLAGEN-
Booth 11050 (MASCHINEN Booth (
Austrian Trade Commission)
A new fast and accurate belling system is provided for PP and PE tubes.
It allows contraction-proof in-line socketing.
Booth 2532, Honeywell continuous network solution (
Display w/Honeywell plastic)
Introduction to Experion PKS process knowledge system for enterprises-
Extensive information management.
It integrates data from MXProLine on-
Line Measurement and Control.
Demonstrate the MXProLine module: ProWeb monitoring, performance quality accompanying data management, and OptiVision production management.
Hosoalpine AMERICAN Booth 5166 introduces AutoTherm segmented molds for automatic thickness control to North America.
It will run three-
Laminated layer-
Use the new 30:1 barrier screw to stage the blown film.
Also shows a new lowprofile, side-fed, three-layer die (Model 2550K)
As well as an oscillating clamp and a series gap to receive wind. HPM DIV.
Taylor\'s industrial service booth is 5507 new low
Cost touch screen extrusion control based on Siemens PLC.
Also show one HGL two-
Rolling bracket and adjustable HGL three-
72-rolling bracketin. -
Wide, highly polished PC, acrylic or PETG plates.
HUESTIS industrial stand 8410 presents Air-flavored er wipes with wire and cable, pipe and Profile Airflow control.
LP booth 8445 production IDM-
Ultramax barrel with tungsten
Carbide coating, new to ensure the service life of the extruder.
Industrial extrusion belt booth 10314 manufactured pull pul belt, custom splints, rubber-
Large, hard-covered rollers, pulleys and pulleysto-pull profiles.
Inoex llc Booth 4793 presents the new liquid additive igsD4 weight metering device, the Saveomat D2 automatic metering device for powders and particles, and the Aurex ERS 36 ultrasonic measuring instrument
Measurement and defects
100% inspection system for pipe quality control. ITAL-
PLAST machinery booth 7144 customized for Ghioldi-
Design, morelayer, blown-and cast-film lines.
10618 Italian manufacturer of bellows tools and downstream equipment will display samples of PE, PP, PVC and nylon bellows.
The product has single and double walls ranging from 6mm ID to 630mm OD.
Professional extrusion Equipment Co. , Ltd.
JLS International Limited
Booth 10959 shows a screen changer with a gear pump mounted on the trolley.
Replacement screen packs, filter elements, and static mixers are also displayed.
Booth 11005 Johnson screen window wire-
Mesh screen filter for changing screen and new random screen filter
A fiber filter medium called a wire spraying board.
Large steel machinery companyLTD. Booth 7026 (
Show w/Karlville development USA)
Taiwan machinery manufacturers will display straw
Bending and corrugated machine with in-line packaging.
Carville Development Corporation, USA
Booth 7026 represents Taiwan machinery manufacturer Zhichang machinery, Haiming machinery, giant steel machinery and Sun Center machinery and conversion system in the United States. S.
Mita SA represents the same group in South America.
Key filter companiesBooth 6307 (
Show Parkinson\'s technology)
Introduction to KSPM-
Manual mesh changer model with linear actuator.
A continuous KCN model is also shown
Manual screen changer with screen changer and Chiva. KIEFEL INC.
Booth 1649 exhibition 3
Kirio was bombed.
The film first appeared in the United States. S.
It has new touch screen control off
Loop thickness control using segmented molds.
New horizontal oscillation traction is also shownoff with non-
Contact the zero contact Air steering rod and folding frame with nylon bristles to reduce scratches and folds.
Also showing the new tandem, backto-
Rear Center/surface/gap winding machine with patent CLP (constant lay-on pressure).
Booth 1227, kka kleinewefers/TRIAD Sales Co. , Ltd (
Show w/Mixaco)
Triad sales representative KKA equipment used for roll cloth processing, calender, extrusion coating, lamination, stamping, concave printing and winding.
Customized Turnkey factory installation is provided.
The Triad also represents brunkner Trockentechnik liquid
Coating production line and curing furnace. KRAUSS-MAFFEI CORP.
Booth 2002 of KMD 133-
Parallel double 36 d-
Screw extruder with high filling PVC and composite profiles and KME 45 XS single-
Screw models for small custom profiles and capstock.
The new fast switch technology is also emphasized, which can dynamically change the pipe size.
Booth Kryenborg INDUSTRIES 5780 will feature several new fusion pumps that have not been shown before in the United States. S.
Several screen replacements are also shown.
KUAG kunstoff-
Booth 11050, MASCHINEN and ANLAGENBAU (
Austrian Trade Commission)
Features tools and downstream equipment for piping, including fully automatic stacking and packaging. New U. S.
Wis Lake Geneva plastic processing technology.
KUNDIG International booth 1335 introduction to North American KNC-200 (
Kundig contactless capacitors)
It is reported that this is the only type.
Also shown in-and off-
Wire Capacitance Thickness Gauge and plane-width controls.
LABTECH engineeringLTD.
The 12410 booth lab extruder Thai builder will run several new models.
One is collaborative modular double
Screw extruder with flip cap barrel and four removable inserts for different L/Ds.
And the new 25-
Mm laboratory production line for casting and blowing film, paper and compounding. A new filter-
The particles below 5 microns will be detected by the test extruder.
Land instruments International booth 11242 introduction LSP7 film thermal imaging device, very high, 1000 points per line
Resolution image.
LSP process thermal imagers, Cyclops portable thermal imagers, S4 fixed infrared thermometers and closed-
Cycle temperature control and monitoring.
LEISTRITZ Booth 5544 is considered the world\'s first demonstration of a relatively new method to demonstrate the use of a supercritical [direct extrusion of olefin foam profiles]CO. sub. 2]in a twin-screw extruder--a 50-
Mm ZSE model with 52: 1L/D and 150hpAC motor.
Longmeng machinery booth 9501 made its debut in a five-
Nylon/EVOH barrier packaging with layer coex blown film line.
It includes two 55-mm, two 25-mm, and one 42-mm extruder--all 30:1 L/D-and an 8-
In, pancake mold with interchanged inserts, plus horizontal swing traction-
Automatic winding machine and automatic winding machine.
75-also on display-
Mm single layer high density polyethylene blowing-
Movie line, bag-
Zipper extruder and side pull rope garbage bag equipmentand bottom-
Sealed bag, softloop and patch-
Handle bags and Flexo printers.
MAAG Pump system TEXTRON Booth 4961 with the introduction of Rubbex gear-
New instruments for pump system and extruder for rubber extrusion.
Manual screen changer and HSC-are also shown-
Man screen changer including large CSC dualpiston models.
185 The Italian company will show three-
Layer blown by Coexfilm extrusion.
Macro Engineering Technology Co. , Ltd.
Recently launched Accupro auto\'s booth 5961 debut
Mold for thickness control, use 8-in.
Two dead pairs-lip D-
10 Air rings, one on the other.
Maguire Products Co. , Ltd.
Booth 9101 showing new extrusion production
Control system, which is said to monitor lb/hr or lb/ft more accurately than before.
Introduction to MLH 5-maillefer sa booth 5579-
The layer pipe head of the car tube that can quickly change the layer.
Will also highlight the production of cross-linking-PE pipe and PE-
Aluminum composite pipe.
Marshall and Williams plastic booth 6307 (
Show Parkinson\'s technology)
With winding and Mono
Two-way directional machinery, including the 400SJ TDO type unit, can reach 800/minute.
Material enhancement International LLC Booth 7913 showing new low temperature downstream cooling equipment for PVC profiles.
Internal cooling with high profile
It is said that in the absence of any water cooling, the velocity low temperature gas increases the output by 200% to 300% (
The result line is 90% short). MEASURETECH (
Measurement Technology Company)
Booth 5529 supply-line and off-
Line Capacitance Thickness Gauge and software for investment and casting film, sheet and coating.
Merritt Davis
The booth 4509 features a new screw, new computer controls, increased horsepower and a proprietary ram feeder recycling extruder. Showing 6-in.
, 36: 1 model, 600 horsepower (vs. 400 before);
It offers recycled PE film up to 4000 lb/hour.
Eagle Manufacturing is also available.
Downstream cutting station.
13021 the company builds shafts and rollers.
It also restores volumes.
Midwest knife mill
Booth 11347 is built and polished with rotary knives and cut-off knives. MIGRANDY CORP.
Booth 10126, featuring innovative hard surface coating materials, comes with extruder screws of different sizes.
Booth 7026, mita sa (
Show w/Karlville development USA)
Represents the same group of machine manufacturers developed as Karlville (see above)
In Latin America. MYUNG-IL machinery
9030 booth bubble-
Production lines for sheet extrusion and co-extrusion, including production lines for extrusion of PS foam plates and chemical cross-linked PB foam plates.
Nanosystems llc Booth 10403 presented its 100% on-
Online inspection of film and paper.
It reports and classifies defects in holes, contamination, gel, spots, stripes and coatings.
A laboratory gel counter is also shown.
NDC infrared Engineering booth 5371 introduces two beta-
Specifications Scanner frame: AccuTrak wide 0 frame and MiniTrak small single
O or C frame on the side.
Also off ProMax.
Circulating supervised extrusion control and display TFG 710 thin-
Film measuring instrument using non-contact NIR sensor.
New Castle industries
Booth 4739 introduces two patented screw designs: the Stratablend II hybrid screw and the NanoMixer hybrid segment.
Free design advice on extrusion screws, hot-also available
Roll transfer and process improvement.
Booth 5501, NFM/welding engineer
Animated touch screen in Aries-control system.
The SPX singlescrew extruder for the manufacture of wood/plastic composite profiles and the single-clip Velcro head for quick mold replacement are also shown. OCS-
12904 optical control system provided by Booth
Line optical scanning system for measuring fog and gloss of film quality control.
A small laboratory casting and blowing tape extruder with a cold roller and hoist is also available, as well as a continuous mini
Calender used to detect contamination of wire and cable coating.
OLMAS Booth 10435 manufactures extrusion lines for corrugated and flexible plastic pipes. OMA USA INC.
Booth 10303, operating hose knitting machine, displaying other weaving, knitting and packaging products.
Online control company
Booth 10106 shows the redesigned ultra-high speed 4000 ultrasonic thickness gauge--
800 times/second, four times the usual rate.
The updated software allows onetouch set-up.
Its goal is high.
Precision Medical pipe.
Also on display the chao sheng bo guan
Meter control and MicroAir ultra-low-air-
Pressure RegulatorH. R.
PAARVIO Handel and holding booth 10626 adopt long
Life screw and barrel as well as compact extruder system.
Spare parts, screws and barrels are displayed.
Parker hannyfin company
See pump.
Parkinson technology
Booth 6307 launches the Cross
Automatic cutting systemand-
Roller transfer winding of heavy-duty sheet at the speed of the lift. PECO Inc.
Booth AB build in-10750, FAS conversion machinery, Peco and sister companyline bag-
Manufacturing and conversion of equipment.
Will run high-
Fast bag making machine and hoist at the exhibition.
Zhoushi EQUIPAMENTOS industrial LDA booth 13537 establishment of Portuguese company
Double Thread and thread
Screw Extruder, pipe mold and downstream equipment for pipes, profiles and plates.
It just got the right.
Off, planetary saw, and chip-free cutter from former Speedex in the United StatesK.
Its new equipment includes a tool of up to 1200mm-diam.
80mm thick PE tube.
DIV. Pillar technologyOF ITW INC.
Booth 1327 will show the single for the first time-sided split-
A box Corona processor for film blowing.
Pipe Roll Technology Co. , Ltd.
Booth 12747 servo with clean cut swarfless pipe/profile cutting machine
The controlled bracket is able to cut a specific number of different lengths without distortion in the case of up to 25 cuts/min.
Another new product of the company is the hoist of cables, hoses and ropes.
The reel machine, hoist, UNREEL, cutter and trailer for high density polyethylene pipes are also shown. PLAST-CONTROL INC.
7932 booth introduction Pro
Air-jet automatic TD instrument control blowing-
Film Line with oscillation mode.
PCC is also launched (
Central control of Factory)
Track the performance of the entire plant or company and report resource consumption, output and efficiency. PLASTICOS B. S. , S. A. DE C. V.
See Beutelspacher.
See the American jet stream.
Wave conversion booth 5555 (
Show w/Polytype USA)
New extrusion
The coating system is made of battonfield Gloucester extruder plus proprietary downstream lamination and handling.
The company previously only provided conversion and printing equipment.
Process Control Company
Booth 3004,5361 offers gravity extrusion yield control with software integrated with downstream takeoff units.
Introduction to Machinery Co. , Ltd. Booth 5849 (
Display w/Unicor Plastic Machinery)
New Distributor of Unicor plastic machinery.
Progressive precision Company
See ExtrusionTek dragon.
Advanced Machine CompanyINC.
Booth 3115 features spoilers, transfer machines and spoilers.
PSI polymer systems
Booth 6343 hydraulic slide-
With innovative seals, gear pumps and fusion-
Temperature probe.
Bolts are also shown
Type continuous screen changer and static mixer.
PTI/Processing Technology
Booth 7518, new floor
Control technology on type 6000 Trident extruder with roller holder, new direct drive and gas knife.
Queensland Machinery LimitedLTD.
Booth 4980 Hong Kong companyand cast-
Film Line, PP and PS paper line, bag making machine, flexo and concave printer, laminating machine, slitting machine, re-engraving machine and drops-
Tube equipment.
Lajo Engineer Co. , Ltd.
Stand 13313 feature Monoand multi-layer blown-
Film, sheet, pipe and profile lines with hoist and takeoff equipment.
Ramboo international sa Booth 11209 Mexican company provides a license for the unusual process of making rattan stripslike, Prolen-
Brand of plastic furniture.
RANDCASTLE extrusion system booth 4544 shows its first level sheetscrew extruder. This 1-in.
, 36: 1 prototype Taskmaster compounder features a special re-cycler spiral mixing element, three vents and a new feed section.
In addition, six Microtruder laboratory models are equipped for casting film, coating, blowing film, sheet, pipe and ball making.
RDN Manufacturing CompanyINC.
Stand 4109 display servo cutter, tapered
Heavy pull pipe cutter
Duty has a coachman and a traveling saw.
REIFENHAUSER
Booth 2270 show upgraded UFA
Reel machine with new tension control.
New non-stick steering rods for viscous film, small non-Gear co-extrusion machine and Reicotherm blowing are also shown
Film mold with automatic thickness control.
Rongren carving booth 2238 (
Show w/mold-Tech)
Make and engrave flower pressing rollers.
Sample roll is displayed. ROLLEPAAL-USA INC.
Booth 12613, United StatesS.
Show the extruder and puller of Rollepaal for pipes and tubes with new touch screen control.
A new vacuum was also shown.
Cooling water tanks and walls-
Thickness scanner.
Rosenthal Manufacturing CompanyINC.
Booth 3035 shows the slitting and slitting machines with enhanced control and higher accuracy.
A resumption was also shown.
Sentinel products
New Booth 1204
Built-in digital microscope
Cell Count of foam.
It has a lens enlarged from 25X to 1000X.
In addition, unusual new foaming olefin plate products have been introduced. One is a three-
Layer PP sheet with CO2
4 The foam core of the pcf and thin solid skin, squeezed out from the ring mold.
Sentinel will license the packaging process but will be in-
Home of automotive applications.
Display foam PE products and technologies.
Booth 5733, sfr industries, displays the extruder crusher board.
Sherman treaters, partition. OF ITW INC. Booth 1327 (
Show w/Pillar technology)
Introduction to the United StatesS.
The halo of ISIS
Processing power through Internet diagnostics.
Booth 9462 sica spa is discussing the belling machine for 52in. -diam.
PVC pressure tube-
Considered the largest in the world.
SML Extrusion Technology Co. , Ltd. Booth 9133 (
Austrian Trade Commission)
First North American show with sleeve touch film
PP, a belt-
Polishing process licensed by Chiba machinery industryin Japan.
PP film with PETlike clarity.
Complete coex cast-
Thin film line of LLDPE breathable film with one-way orientation.
Highlight 2000 high-speed cast-film winder. SOLVETECH INC.
Booth 5593nuclear, on-and off-
Line Capacitance Thickness Gauge.
Visitor samples will be tested at the booth.
Special extrusion equipment company
Booth 959 changed its name to JCS equipment company this month
The company presents a new fence profile saw that saw, cut, punch, route and mill as the table moves.
The results are considered to be higher accuracy, faster line speeds, shorter line lengths, and better cuts on warmer profiles.
Speck pumps Booth 11045 has introduced a new type of liquid ring vacuum pump. SPIREX CORP.
Booth 1045 manufactures extruder screw and barrel, providing consulting service and special screw design.
STC equipmentBooth 13425 (
Show w/Zambello STC)
Distribution of new gear box production lines for twins
Screw extruder and single-
Screw gearbox--
Zambello from Italy. STERLING INC.
Booth 1415 introduces servo cutters, dust suction slots and belt pullers.
Sun Center Machinery Co. , Ltd. Booth 7026 (
Show w/Kartville development USA)
Chinese film blowing line manufacturers will show a run in-
Bag Machine line with conversion system.
Surface Engineering & Alloys
Booth 7215 encapsulates the screws with carbide and guarantees double the life of any screws.
Booth visitors can test the wear resistance of tungsten
Carbide coating compared to CPM9V and D2 tool steel.
Limited by share Ltd.
Booth 4984 new double-clamp-
Frame profile calibration table with two independent adjustable clamp frames for two sets of tools with different center heights.
It also shows a single double saw. or double-
Shares squeezed. TECNOLOGIA B. S. , S. A. DE C. V.
See Beutelspacher.
Texas extrusion services
Booth 5693 re-manufactures the extruder, screws, barrels and gearbox.
In addition, new screws, barrels and extruder have been customized.
Thermal Electronics
Department of Material representation.
Booth Thermo Haake lab-926
Scale extruder, viscosity meter, flow meter and mixer.
Display American lab 16-mm twin-
Screw extruder for 40: 1 L/D
Thermal Electronics
Process instrument Department
Booth 9342 combines the previous thermal Ramsey and thermal radiation measurement product line, which will showcase thickness gauges, controllers and CIM for extrusion.
Hot HAAKE see hot electronics
Department of Material representation.
Thermal Ramsey see thermal electronics
Process instrument Department
Tong Xin Packaging Co. , Ltd. LTD.
Korea manufacturer of Booth 10629 polypropylene and Polystyrene Sheet extrusion equipment.
Booth 9133, TOPF kunstofftechnik Co. , Ltd (
Austrian Trade Commission)
Manufacturing complex calibration tools for PVC profiles.
Trendelkamp lp booth 9716 display particles-Size classifier;
Double combo-
Valve, a plug-in changer and a concentrated component;
And a discontinuous single.
Bolt mesh changer.
JLS International also represents Trendelkamp (Booth 10959)
This will show more screen replacement and melting for Trendelkampfilters. TREXEL INC.
Booth 3038 permits the use of MuCell micro-foam extrusion technology with a supercritical physical blow molding agent.
Focus on new TPV applications for automotive sealing systems. TSI INC.
Booth 13012 display length-and speed-
Measuring the diameter of the laser sensor and the Holix-
Laser Scanner for holographic calibration measurement.
TSM Control Systems Ltd.
Booth 4017 will display ultrasonic width measurement and control using the updated Sigmat 600 system.
The Sigmat 505 thickness analyzer is also shown.
UNICOR Plastic Machinery Co. , Ltd. Booth 5849 (
Display w/ProfilePipe Machinery Co. , Ltd. )
Introduction of UC58 variables
Length reducer with standard North American length mold.
First show of new high-
It is said that UC 100 mobilugator with a running speed of more than 100/minute.
International Limited
Show booth 691 squeezed by parents Greiner-
Stechnik\'s latest mold, calibration and downstream technologies include a new calibration table for the outline of the window and a new chip-free cutter.
The Efefp/anderson wire works Booth 11313 presents replacement screen packs, silk cloth, copper cleaning materials, and sintering porous filters.
Booth 12940 of United precision engineering group (
Show w/Magna Machine)
Production of blow film molds and downstream equipment-
Air rings, nips, IBC, and cooling and winding rollers.
Venus Plastic Machinery Co. , Ltd. LTD. Booth 7325 (
Taiwan Trade Center)
The film blowing line is provided.
Weixing Machinery International Co. , Ltd.
Booth 7019 imported profile, film, sheet and pipe turnkey extrusion production line.
Waken machinery
Booth 9401 shows a tension-free reel machine for pipes and profiles.
Video showing other downstream devices, including the hoist.
Walkormoli company
Booth 13449 features hard alloy
Surface screws that prevent wear and corrosion.
Wayne machines & molds
Booth 4439 yellow jacket counter-
Double rotating cone
Screw Laboratory Extruder for powder PVC and other resin.
Also on display 1. 25-in. -diam.
, 24:1 cast film laboratory line and 0. 625-in.
Silicone rubber extruder.
See ExtrusionTek Kelon for garment craftsmanship.
Booth 10631, weko biel ag (
Enterprises participating in the exhibition)
KineTik is Switzerland
Weko rotor damping system was manufactured for liquid coating on the film Network. WELEX INC.
Booth 4501 introduces a fully redesigned evolutionary single line with 3. 5-in. and 4. 5-in.
Rapid extruder, integrated wiring and hoses
Disconnect the thermocouple, built-in-in die support.
In order to allow for a larger roller diameter and easier cleaning, the mold is lifted.
There are direct linear bearings and air/hydraulic rollers for sheet takeoff-gap mechanism.
Use non-cooling rollers
Threaded pipes so they don\'t leak.
Also show 7/9-
Layer feedback block with AutoFlex mold.
West screw booth 10324 (
Show w/Romax)
Romax represents Western Feed
Squeeze screws for screws. WESTLAND CORP.
Booth 4733 low
Shear eagle hybrid screw for extrusion applications up to 30: 1 L/DWEXCO CORP.
Booth 3011 shows samples of double-layer cylinders.
Oudemler company
Booth 1885 will showcase the new touch screen control panel for its Varex blow film extruder.
Also shows a lot of new
Vibrating tractor
Closed with Nostic rollers.
The new automatic roller and shaft handling system on the Filmatic T winding machine is specially developed for the United StatesS. market. A three-
Layer Varex line with Optifil P-
The booth will run automatic mold control.
Windsor feed screws
Booth 10226 makes new and replaced single and double screws, barrel, tip, end-
Hats and iron bars.
Winterris engineering
Booth 12934 WebRanger surface-
Use a line array CCD camera detection system networked with improved software and lighting. XALOY INC.
Booth 1425 shows the new melt main barrier screws are said to have 20-
35% increase in melting capacity
The unique adjustable dam allows the adjustment of the melt body for different polymer viscosity.
Ask for a quote at the booth and have the chance to win new screws or barrels up to $2500.
Booth zeiger industries 7218 introduces ZPM special screw, an improved general purpose-
Designed with excellent mixing and melting purposes.
The Wexco bimetallic barrel is also shown.
Ceiling pump group.
Parker hannyfin company
Booth 5739 presents the new 9000DS gearbox for liquid distribution with a PDA interface.
Several other equipment were also shown.
Pump model: pep ii, B9000, C9000.
ZUMBACH Electronics Co. , Ltd.
Rayex non-introduction booth 5191
The \"dry\" OD/ID measurement system contacts of the pipe.
It can be used for fluorine polymer and composite tubes and hoses.
New configuration files are also availablemaster light-
Profile curtain measurement system.